*use “THUG” at checkout for free shipping
This is the “LITE” version – Frame and POD only – No wire extenders for motors in the kit
The Foofighter…Super fast…Super agile…Tons of pop… great flight times… Absolutely loads of build combos available.I made this solely for all the new whoop electronics available, And theres tons of them which makes for tons of options!
For example during development Ive fitted beta75x/SpedixRex80/Mobula7/beta85hd internals ( just use the appropriate pod ). Motor to motor is 120mm which means it will accept just over 3″ props! Which gives lots of prop options. Ive tried 4 different props so far and they all had way different flight characteristics which im going to cover in a video as I have some very promising looking new props on the way from several manufacturers which should open up this new world of high amp micro setups full performance. Its got 3 and 4 hole motor mounts, Standard whoop drillings (slotted for wiggle room for all the fc’s) plus 16X16 / 20x20mm for the Spedix type boards and towers. Fully cut with the grain to retain max strength – Main chassis weighs in at 6.8g in 2mm Toray 3k twill – Fully chamfered.The 3d printed tops vary in weight but average is 6-7g per pod depending on material printed.
All the 3d files are here:
3D file links will be added to the list as they grow. New pods for spedix will be up soon.
included in the kit .
1 x Carbon chassis
1 x THUGWHOOP 3d printed pod – please choose in options (green petg supplied at mo)
All you need is a donor whoop and your good to go …. Nothing else should be needed for you to convert …. Apart from Props 🙂
I have to print parts for these so there may be a small 2-3 day delay while the frame gets processed. As I make them they are always in stock:)
Grab one of these for yourself …. you Wont be disappointed with performance like this!