THUGFRAMES®FOOFIGHTER READY TO BIND/PLUG-N-PLAY

THUGFRAMES®FOOFIGHTER READY TO BIND/PLUG-N-PLAY

£189.00£199.00

Clear
SKU: foo-pnp Category:

Description

People have asked so heres a direct copy of what I built for myself…
Its the Foofighter frame with betafpv beta75x electronics installed – see here for the details

I take a beta75x (specs below) take it apart and rebuild into what you see here using the frame linked above. I then apply a tune ive done for a truly superb acro experience…. these things seriously kick ass! im getting nearly 4 heavenly mins of flight on a 300mah 2s lipo!

Heres the specs of the donor quads – *NOTE The new version of the Beta75x ive ordered that I will use the electronics from these will have uprated 12a esc’s which will give 3s capability! the things rip on 2s so 3s will be batshit crazy!

SPECIFICATION

Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole – *changed to 75mm props
Camera: Z02 AIO Camera 35 degree
Receiver Option: Frsky XM+ / DSMX / Futaba S-FHSS / Flysky

FC SPECIFICATIONS

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX

ESC SPECIFICATIONS

Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S-3S Lipo
Continue current: 12A
Peak current: 15A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G

Z02 AIO Camera VTX

Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens

So over all some really nice strong up to date specs.

Ive been flying acro for a long time and every time I fly this its amazing. The Betafpv electronics in the 75x used for these builds are really durable so Im happy to send them out into the wilds with my name on them.

Every one of these builds will be made to order and bespoke so please allow up to ten days delivery – it should be way less than this but im covering myself incase you wonderfull customers make me really busy 🙂 Ill also be contacting every purchaser of these as to keep them in the loop of build times etc from start to finish. Bespoke, built and tuned by myself for you . Ive been selling and making miniquads for a long time …. 6 years!! your in good hands.
Any questions please email sales@tentech-rc.co.uk

Additional information

Weight 150 g
Dimensions 360 × 260 × 30 mm
PROTOCOL

DSMX, FLYSKY, FRSKY FCC, FRSKY LBT, FUTABA, TBS CROSSFIRE

You may also like…