THUGWHOOP 75X PCB CHASSIS -BETA75X/75PRO/MOBULA7/TRASHCAN CONVERSION KIT *FREE WORLDWIDE SHIPPING*

THUGWHOOP 75X PCB CHASSIS -BETA75X/75PRO/MOBULA7/TRASHCAN CONVERSION KIT *FREE WORLDWIDE SHIPPING*

£19.99

SKU: thugwhoop75pdb Category:

Description

**USE CODE “THUG” AT CHECKOUT FOR FREE SHIPPING**

 

 

THUGWHOOP 75MM PCB CHASSIS -BETA75X/75PRO/MOBULA7/TRASHCAN CONVERSION KIT or FULL CUSTOM BUILD

In the pack

1 x FR4 PCB CHASSIS 2.4MM THICK  (no hardware)

1 X 4 way PIN HEADERS

Description

I designed this frame as I wanted to unlock some of the capabilities of the new whoops electronics which are held back by some of the features of the ducted frames . Don’t get me wrong I love ducts too but outdoor acro isn’t one of those places I want to use them, So I binned them …

After loads of versions I  settled at the design your looking at here. Its been made in carbon for a while now and shown to be a cracking flyer so I was happy for the shape to be carried across to the pcb version. I had them specced at 2.4mm thick for max durability and im more than happy with the strength and stiffness.

They are very nicely made and once in your hand you will know to. No wonky LED.s – No smudged up writing or solder mask . Just ready to go and looking great.

So all in all , An easy to swap frame kit for the new breed of brushless whoops !

Some bits I added…

Hard mount receiver with universal pinouts

A pin mount for your rx to affix to giving a super solid mount with no more flapping about (see pics) and will fit most rx,s with through pins. In the pics you can see a XM+ fitted. The chassis has pinouts on each end so you can mount the rx  to either end then take the cable off the pinouts at the other side and up to the board for the connection.

 

Lights!

Man this thing needed some lights so theres an addressable 5v LED at each corner – fully configurable in Betaflight etc . Tons of colours and they look super cool and really bright! So much brighter in real life than the pics !

A Velcro strap holder built into the frame and I also have a 3d printed file for 2s batts that i will LINK here ….

Fits both the the 3 and 4 stud motors (07?/08?/1103etc) and has the standard whoop fc drillings for mounting the electronics.I have slightly slotted the holes at the flight controller / stack to give a small amount of wiggle room as ive found some of the boards are just a tiny amount different at the mount points – This helps negate this issue and every one of the whoops flight controller listed above fit in the space.

Highly recommended for this build, as each of the conversions use a slightly different selection is our large box of nylon standoffs and fixings . We also have the 600 screw packs also for the motor screws, also very handy!

 

 

Absolutely zero washout – A true acrochamp

 

All in all a nice performance upgrade or great for a custom build

frame weight 7.9g

 

Cant wait to see some of these ripping about 🙂

The weather here is terrible but I grabbed the smallest bit of footage between the rain….hence the wellies !  Ive yet to tune her up but she’s fast nimble and ready for those inverted yaw spins! 🙂

 

 

 

 

Additional information

Weight 20 g
Dimensions 360 × 260 × 30 mm

You may also like…